Pages: [1]
Print
Author Topic: 1996 EJ20R Legacy GTB ECU "4G"  (Read 207 times)
mikab
*
Offline Offline

Posts: 2


View Profile
« on: November 05, 2009, 02:20:11 PM »

Hi every one!

I was advised to ask here for guidance Cheesy
Here is bin file from my TT Legacy that has been chipped in japan.
Can anyone tell me witch map in there is for what?

Logged
mrdjc
*
Offline Offline

Posts: 38


View Profile
« Reply #1 on: November 08, 2009, 04:17:26 AM »

I'm not sure where everyone is but this forum seems to have gone dead-ish!

Watch out for the tumbleweeds etc.

Hopefully someone will be along to help shortly.

The fuel/timing/Ignition advance maps seem to follow a pattern, so maybe the Twin turbo stuff will be after that..

Have a hunt for "Free Hex Editor Neo" on Google and download that to get started, it will allow you to see the raw code in hex.

I tried to use Evoscan on someone's GTB the other day and for some reason it did find the ROM ID and connected, but it never captured any data using the default parameter addresses. I think his was a 4G as well.

So is yours a Mines or something? Any special stickers? Can you post up some pics of it perhaps?

What year is your legacy? Is the ECU still factory fit (Except that its been modified) or an replacement one, being a different number? One way to find out is if you open your glove compartment box, have a look on the left hand side of the box itself, there should be a sticker there with some numbers, can you post them up (If the sticker hasn't been removed)

For the fuel map, Since it was the same for Bretts ECU as well as My ECU and Phils I'm hoping the GTB has the same addresses Take a look over on this post here at this thread: http://www.subiesmart.com/forum/index.php/topic,43.msg385.html#msg385

Cheers,
Daniel.



Logged
mikab
*
Offline Offline

Posts: 2


View Profile
« Reply #2 on: November 11, 2009, 07:52:03 AM »

OK

i have been playing around whit tunerpro rt and few other softwares and managed to find at least 7 maps in there.
1120 looks like fuelmap
2000 ?
2100 ?
2200 ?
2300 ?
2400 ?
26A0 ?

my legacy is made 7/96 by chassis code and the ecu is not original from it,its ksrom ecu that has daughter board in it.
i think i need to hook up my laptop on it and just try what happens when doing some changes to maps Cheesy
I'm not so good whit computers and all information on this kind off stuff is in English so I'm having really hard time to understanding even half off it Cheesy
as for pics:
http://s589.photobucket.com/albums/ss338/kirka_01/?action=view&current=DSC00030.jpg


Mika


Logged
Pages: [1]
Print
Jump to: